Kriega Os Base Installation. OSBASE KTM 690 + HUSQVARNA 701 + GASGAS 700 — KRIEGA USA Official Use the SUBFRAME LOOPS included to mount a single OS-ADVENTURE PACK on the seat, without the OS-BASE, for the shortest trips. To fit an OS-PLATFORM simply remove the top, front alloy section, then replace and tighten the two bolts
Kriega KRIEGA BASE OS DIRTBIKE SIST.MONTAGGIO TASCHE OS from www.louis-moto.it
Use the SUBFRAME LOOPS included to mount a single OS-ADVENTURE PACK on the seat, without the OS-BASE, for the shortest trips. OS-BASE they provide various mounting locations for a 3 or more bag set-up
Kriega KRIEGA BASE OS DIRTBIKE SIST.MONTAGGIO TASCHE OS
As team ftb stated above, it's not a significant improvement over the overlander system (US) The OS bags are kriega's new system that works with the OS Base. Use the SUBFRAME LOOPS included to mount a single OS-ADVENTURE PACK on the seat, without the OS-BASE, for the shortest trips.
Kriega KRIEGA OSBASE MONTAGESYS OSTASCHEN HONDA CRF300L. Mark the best location to drill and mount the OS-RACK LOOPS.(Follow instructions below) Once mounted hook-on the straps but leave loosely fitted. Mount the OS-PLATFORM in the same way as a standard tube frame, using the five clamps, three at the top and two at the base
Kriega OSBase Ktm 790/890 Adventure. The OS Base system is really intended to be installed on Enduro bikes with thin frames and rear plastics that cover the exhaust system KRIEGA.COM KOSBA-G-FIT-1 FITTING THE OS-RACK LOOPS 2 x HYPALON LOOPS Determine the mounting location for the two rear OS-RACK LOOPS by test fitting the OS-BASE